The Autowatch Ghost Immobiliser
Autowatch Ghost, a revolutionary immobiliser, protects your pride against thieves. The weatherproof, small device is hidden within your vehicles wiring and is inaccessible to anyone who is looking for it.
The device stops key cloning and ECU swapping by silently working with the vehicles CAN data. It won't allow your vehicle to start until you select the unique factory-installed button sequence.
Distinction Design
The Autowatch Ghost immobiliser is discreet and silent, as it does not rely on radio signals. It is directly connected to your vehicle's CAN network and uses the buttons on your dashboard or steering wheel in order to create a discreet PIN code. This is a much cheaper alternative to wheel locks or trackers. It will also prevent thieves from copying your key fob in order to gain entry into your vehicle.
The device is easily and neatly fitted into the dashboard or centre console of your vehicle. It can also be hidden with a cover. It does not need LED indicators or keyfobs to function, which means that thieves are unable to detect its presence. This system is also weatherproof and has no exposed wiring, making it resistant to any attempts to alter or take it away.
After your Ghost immobiliser has been installed, you will be sent an encrypted iPhone application that allows you to manage it. This means that you are able to disable the device for a short period so that your car can be driven away for servicing or valet parking. If you enter the PIN code then the Ghost will activate again and continue to safeguard your pride and joy.
Security systems such as the Ghost have become more valuable because the number of stolen vehicles has risen. The Ghost's subtle design is perfect for owners of luxury vehicles who want to maintain their car's performance and aesthetics while increasing security. ghost immobiliser problems is certified by Tassa, endorsed by insurers and offers a strong security against key hacking and key copying. It will track your vehicle's location and send you an alarm when it begins moving. This makes it an excellent investment, especially in the current climate where thieves are targeting high-value vehicles. A professional installation of the Autowatch ghost is a must to make sure that you do not end up voiding your car warranty.
CAN Bus Communication
The CAN bus transfers data from one electronic device to a different one in your car. It is used for a variety of reasons, such as monitoring parking sensor systems and feeding information from outside proximity to driver assist systems such as warnings of lane departure. It can be used to activate brake by wire systems such as active collision avoidance. It is an efficient system that operates with high signaling speeds using the twisted pair cable, which provides robust reliability and noise immunity.
The Autowatch Ghost immobiliser connects to the CAN data network of your vehicle and prevents key cloning and theft by preventing the engine from starting. It is quiet and doesn't emit radio frequency signals, making it virtually undetectable to scanners. Once you have programmed it with a unique PIN code, it is not possible to defy the device by replacing the ECU or using another key.
It uses CAN bus communication which is a highly reliable method of communication that is resistant to hacking and interference. CAN buses employ balanced differential signaling and twisted-pair wiring to ensure that messages are sent exactly at the same time and each bit is recorded at the same location. This eliminates the need for buffering of signals which is the most common reason for transmission delays and errors. The CAN bus also allows error-checking by sending an alert to all nodes each time an error occurs.
It's now more crucial than ever to safeguard your vehicle with an immobiliser. The Autowatch Ghost is a top-of-the-line product and is TASSA approved which means that more insurance companies are willing to offer cover for customers who have the device in their vehicles.
Installing the Ghost is a specialist procedure that should be completed by a qualified installer. Once it is fitted the device will be hidden from view. You can turn it on when you need to by pressing a pre-set set combination of buttons on your dashboard or steering wheel. You can also use emergency pin code override cards which you will receive at the time you install the device to turn off the immobiliser in case you forget your pin.
No Radio Frequency Signals
Like other immobilisers Ghost is not activated by key fobs and has no indicators with LEDs on the vehicle to give away its whereabouts. It is based on your car's CAN data circuit and is completely silent, meaning that thieves will not even know that it exists. This makes it very hard to spot and is a major deterrent for thieves looking to steal your car.
The Ghost is an immobiliser of the highest quality that guards against key hacking, key cloning and key theft. It is connected to the engine controller unit using CAN, making it very difficult for thieves to take away or disable. The system is also tamper-proof and activates by entering an individual pin code that you can change at any time.
This will ensure that the time you leave your car unattended, you can still drive it. No one else will be able access the vehicle and drive it. This feature is extremely useful if you need to shop or to pick up deliveries or visit the bank. This feature can also be a good deterrent to people who want to break into your car and steal your belongings.
Ghost is a great deterrent as thieves won't know how to get your car started. This is because the system does not use traditional security measures, such as wheel locks or cutting wires. Instead, it uses a unique system that requires you to enter your PIN in order to begin the car.
Additionally, the Ghost can also be set to service mode, preventing your vehicle from starting until you enter the PIN code again. This is a great option for those who are planning to travel for a long time, like the duration of a business trip or holiday. When you enter the PIN a second time, you can easily re-program the device back to its original mode.
The Autowatch Ghost is the most efficient CAN bus aftermarket immobiliser. It is quiet, discrete and unnoticeable by a potential thieves. It safeguards your vehicle against cloning or hacking, and helps you reduce insurance premiums. It is a top-rated product that has been independently verified by TASSA, giving responsible car owners peace of mind and the confidence that their prized possession will remain where it belongs, in their driveway.
Easy Installation
The Ghost Immobiliser is a revolutionary next-generation security system that shields vehicles from key hacking and the cloning. It connects directly to the vehicle's CAN data network and utilizes buttons already on the steering wheel and dashboard to generate a PIN sequence that has to be entered in order to start the engine. This ensures that your vehicle can only be operated by people have been authorized. It's also Tassa Certified, and Insurance Approved. This makes it the perfect solution for vehicles that do not have an immobiliser.
The installation process is straightforward and can be completed in less than a couple of hours. The first step is to determine the power wire from the battery to the Ghost Immobiliser unit. To prevent short circuits from happening, it is recommended that the power wire be insulated using heat shrink tubing. Make sure that the wire is connected to an ignition or any other source of constant 12V.
Use cable ties to secure and bundle the connection after you have identified the connection. Install an appropriate fuse tap to protect the connections from power surges. Connect the Ghost immobiliser to an earthing connection in the chassis of your vehicle.
Once installed, the Ghost Immobiliser is not able to be detected by thieves because it doesn't emit radio waves and does not need LED indicators. It is also quiet, which means criminals will not be able to hear it working or disable it. It is also tamper proof because it requires a unique pin code that can only be entered by the driver.
If you're worried that you'll forget your PIN Code or the button you use becomes unresponsive, there is an emergency override with the Service/Valet Mode feature. This lets you temporarily disable the Ghost immobiliser to facilitate service or valet parking.
The Autowatch Ghost immobiliser is easy to use and provides a convenient alternative to traditional keyfobs. Connect your iPhone to the device and it will pinpoint your car's position and give you a list of nearby places. The app can be used to track and monitor the location of your vehicle in case it's been removed or stolen from a specified area. Its ease of use and stealth features make it a preferred choice amongst many drivers.